Monday, September 21, 2009

Jumped Into Pool And Jammed Knee

The Bloody Beetroots





















Romborama
(Universal)
E finally arrived. After miles of touring around the world, in decibels burned bodies and ears of millions of young clubbers and gallons of sweat under those masks superhero Rifo bad here that Bob brings a gift to contemporary music, his opus maximus. Since the high-sounding title and roaring, deafening and cumbersome. It must be said, "Romborama", like it or not like the Bloody Beetroots, is an important disc. Why is the low and low distortion of Bassano del Grappa of that "punk with an attitude" that is Bob Rifo, fine mind that for years and then whisk in wine clubs and attached to the computer to break something. The wall of indifference towards the international Italian music, the wall of the Italo Disco and cult prog as unique musical forms "quality" of our country universally recognized, the wall of silence Information approved to our local quality music. Because there's more and he and Tommy with their incessant agitation war done in every club in the world have demonstrated. And now I'm here with this manifesto, a behemoth of 21 tracks combining all the imaginary sound of "beets bleeding." There are baroquisms classic between Rondo Veneziano and Giorgio Moroder ("Have Mercy On Us" with the next big thing Cécile), there are synths zarri and sizzling, and those beats iperpompati (in "It's Better to DJ On 2 Turntables" or " Warp 1.9 (feat. Steve Aoki) "), there are distortions that are so hard punk (in" Talkin 'In My Sleep (feat. Lisa Kekaula) "or the title track itself with guest Leather or part of The Locust), there is the legacy of rap electro Baambaata Afrika (as represented by the International Cool Kids in "Awesome", the Italian version of Marracash in "How The '), there are also "dance" in which electronic beats and melody melt overflows (in "Second Streets Have No Name (feat. Bow Beta) 'or' Little Stars (feat. Vicarious Bliss)"). There is all to show that after the Justice, willy-nilly, is "Romborama" with all the pros and cons of the case. Let's just say that the main obstacle to deal with a work like this is that it is extreme at all costs. An aura of heaviness hovers threateningly. It is difficult to get to the bottom, even if the pearls are in the process. It is difficult to accept him as an lp to listen to from beginning to end. But in general, all records of this type have shown this weakness, so far. By Justice, to Digitalism, Boys Noize until: I defy anyone to resist until the last minute of each of these discs. "Romborama" does not make a difference in this regard. This does not detract, however, its importance and conceptual music.

Saturday, September 19, 2009

Help Me Win The Lost Lyrics

FLEX-5000A with RX2: total flexibility

The FLEX-5000A transceiver is designed with a hardware architecture is very flexible. In addition to the many connections to different types of accessories (see card FLEX-5000A), it can be mounted inside your cabinet for a second receiver (RX2), in all respects equal to the main receiver (RX1) completely managed by PowerSDR in simultaneous RX1.

RX2 can be configured at any time in order to use one of the three antennas available on the FLEX-5000A or an antenna dedicated to it (on exclusive input connector). RX2 are possible with different "scenarios to be" very interesting
  • monitoring of a band other than the RX1
  • listening mode "Diversity" (requires special PowerSDR)
  • listening on the other side even though RTX is Transmission (with antennas)
  • analysis of CW signals in a specific band (with CW Skimmer)
On this last mode I understand the importance of RX2 and the incredible flexibility, not found on any other transceiver amateur, the FLEX-5000A with RX2.


picture above you can see a very complex configuration PowerSDR, similar to that presented in the previous post but with the introduction of RX2 (note panadapter of PowerSDR divided in half: on RX1 - RX2 below).

In practice, we have this situation:
  • TX RX1 & LSB on 40M (with dipole)
  • RX2 on 20M CW (VAC enabled to 96Khz)
  • CW Skimmer in analysis
  • Logger32 with RX2 enabled on DXcluster CW Skimmer
  • Tmate for tuning "manual" RX1 or RX2 choice.
when configured as above is possible, for example, make a QSO on 40M and simultaneously monitor the traffic you receive on CW in the range of 20M (or whatever) and in the case of a spot of interest to us, by clicking on Logger32, the RTX (RX1 & TX) automatically tunes to the frequency and mode of the SPOT to make immediate call to the station reported. As you can see by CW Skimmer RX2 CAT controls, without being confused with RX1, as CW Skimmer provides the opportunity to select their own (only PowerSDR) which of the two handsets to use and control. The "audio link" between RX2 and CW Skimmer is also made using Virtual Audio Cable (VAC), specifying in PowerSDR to send the signal of RX2 only. The link management CAT is always entrusted to VSPE.

E 'should also be noted that the use of RX2 is well integrated into the chain of forwarding, that can be operational immediately place in either band (RX1 and RX2), with the right antenna and the
other specific parameters of the band, with just one clik of a mouse!

73 Beppe
IK3VIG

Thursday, September 10, 2009

Bethesdia Fountian Angel, Replica For Sale

Vcom + VAC for seamless integration of SDR


Hello,

to completion of the previous post here is another example of what can be done by connecting through various programs with a SDR virtual serial ports and, to introduce the subject, even with VAC: Virtual Audio Cable.

Above image showing running a real operating conditions, high performance and fully synchronized in all its components:
  • PowerSDR FLEX-5000A transceiver on
  • program LOG station: Logger32
  • CW Skimmer
  • Tmate
Behind it all is that CW Skimmer, using the Virtual Audio Cable, receives a stream of 96Khz PowerSDR full of information that appear as CW signals, identifying CALL - Frequency and speed of transmission.

The transceiver is tuned in the range of 40M, set for release in the CW and is controlled by CAT CW Skimmer: just click one of the signals on the waterfall display of CW Skimmer to automatically tune the signal on PowerSDR/FLEX-5000.

not all here as CW Skimmer has a telnet server with which it can transfer information to another program. In this case Logger32 received this information and shows them as coming from a DX Cluster, and highlighting the data cross-checking them with those of LOG of our links.
Again, again via Vcom, Logger32 FLEX-5000 can tune the frequency of a station of our interest reported on the DX cluster window.

Logger32 also operates the CW Keyer, from which you can transmitted directly without button, connected to
PowerSDR/FLex-5000 with a virtual serial port dedicated to the Keyer. To finish the

sistuazione shall Tmate that can be used to fine tune the VFO or, as in the figure, tune the VFO B for the possible transmission SPLIT.

In short the connections CAT: CAT
  • PowerSDR/FLEX-5000 with attivosu COM7
  • CW Skimmer / Logger32 / Tmate on COM8 (splitter COM7)
  • PowerSDR/FLEX-5000 with keyer port on COM5
  • Keyer
  • of Logger32 on COM6 (couples with COM5)
PowerSDR CW Skimmer and connected via Virtual Audio Cable to 96Khz to send the contents of the Spectrum I & Q.

Thanks for reading, next to the post analysis of the Virtual Audio Cable